Microduct Connectors – Gas Block, Straight
MPB 306 02 and MPB 306 07+

Description
The gas block microduct snap-in connector is normally used between indoor and outdoor environments to prevent air flow that may result in condensed water getting into ducts. After cable installation, the connector can be gas sealed by turning a ring on the body or by pushing the connector ends together.
Technical Information
Design: Microduct Gasblock Connector and End Stops, re-openable
Type: Above ground use
Dimensions: OD/ID Ø5/3.5 to 14/10 mm
Microduct Connectors – Gas Block, Straight
E-nr | Product No. | Product Name |
5040353 | MPB30602 | Gas Block Connector 5/3.5 mm 1.0 - 1.6 mm |
5040913 | MPB30607/7 | Gas Block Connector, 7/3.5 mm 1.0 - 1.6 mm |
5040906 | MPB30607/10A | Gas Block Connector 10/8 mm 5.5 - 6.6 mm |
5040907 | MPB30607/10B | Gas Block Connector 10/8 mm 6.5 - 7.2 mm |
5040908 | MPB30607/12A | Gas Block Connector 12/10 mm 5.5 - 6.6 mm |
5040909 | MPB30607/12B | Gas Block Connector 12/10 mm 6.5 - 7.2 mm |
5040910 | MPB30607/12C | Gas Block Connector 12/10 mm 7.2 - 8.2 mm |
5040911 | MPB30607/14A | Gas Block Connector 14/10 mm 6.5 - 7.2 mm |
5040912 | MPB30607/14B | Gas Block Connector 14/10 mm 7.6 - 8.2 mm |