Accessories for Blowing, Lubrication and Cleaning


Micro Cable End Caps


Brass end caps should be mounted on the cable end before blowing the micro cable into the micro­duct. The end cap forms a rounded tip that facilitates blowing through duct joints. They also prevent air from penetrating through the open cable end into the cable. These end caps are extra slim to enble blowing into slim microducts. An inner thread makes them easy to mount on the cable tip. The end caps can be re-used.


Technical Information
Design: Brass end caps
Type: For micro cables
Capacity: 2-8 mm

Blowing Beads


Beads that can be mounted on the tip of the air blown fiber unit for optimal blowing performance. This is recommended for long installation distances with many duct connectors or sharp bends. The beads come in two different sizes to suit the different blown fiber units. Blowing beads are sold in bags with 100 pcs.


Technical Information
Design: Blowing beads
Type: For air blown fibers
Capacity: 2-12f ABF

Cleaning Sponges


Cleaning sponges are used when cleaning dust or moisture from a microduct. The sponge is simply blown through the microduct by the air pressure from the installation tool. The sponges are also used to smear out cable blowing lubricant in microducts. Cleaning sponges are sold in bags with 100 pcs.


Technical Information
Design: Cleaning sponges
Type: For micro ducts
Capacity: For microducts ID Ø3.5-10 mm

Lubricant for Cable Installation into Microducts - The Viper Venom



Hexatronic Viper Venom is a lubricant for cable installation into microducts. It is especially suitable for micro cable and nano cable installations.  The lubricant is non-toxic, easy clean up and non-flammable.


Technical Information
Design: Lubricant for microducts
Capacity:0,24l per bottle

How can we help you?