The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

MPB30350+

Microduct 7/3.5 mm Eco

TWD 7/3.5 mm Primary Tube, Colored skin

  • For direct burial
  • 7/3.5 mm microducts
  • Low friction inner surface
  • ≥51% Recycled or reused material
  • Lower environmental impact compared to versions with virgin materials
  • For direct burial
  • 7/3.5 mm microducts
  • Low friction inner surface
  • ≥51% Recycled or reused material
  • Lower environmental impact compared to versions with virgin materials
Talk to an expert

The thick walled microduct are designed with an inner low friction surface that enables installation of air-blown fiber units or nano cables. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection. Since these microducts are partially made with recycled or reground materials, they have a lower environmental impact compared to versions made entirely of virgin materials.

7/3.5 microducts are optimized for installation of air-blown fibers and nano cables. The microducts have a solid low-friction innner surface for best blowing performance and contain at least 51% of recycled or regrind high quality material. The materials are chosen to secure best performance and lifespan. All microducts are black with a colored skin. The carbon footprint reduction, compared to versions made entirely with virgin material, has been verified according to life cycle calculations (cradle to gate, EF3.0). For more information, see https://www.hexatronic.com/en-uk/microducts-for-the-future

Microduct 7/3.5 mm Eco - Technical Details

Microducts: HDPE, ≥51% recycled or regrind

Technical Information

Tuotteen väri

12 different colors are available: red, green, blue, yellow, white,

grey, brown, violet, turquoise, black, orange and pink.
Lämpötila, käyttö [°C] -40 to +60
Lämpötila, varastointi [°C] -40 to +60
Lämpötila, asennus [°C] -20 to +50
Vaatimustenmukaisuus

Abrasion: IEC 60794-1-2-E2B(1)
Kink: IEC 60794-1-2-E10, 20 x outer diameter
Impact: IEC 60794-1-2-E4
Crush: IEC 60794-1-2-E3
Tensile: IEC 60794-1-2-E
Bend: IEC 60794-1-2-E11A
Torsion: IEC 60794-1-2-E
Flexibility: IEC 60794-1-2-E8
Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Merkintä

Microducts have markings showing the type and tube length. The individual microducts are identified by their colors.

12 different colors are available: orange, yellow, red, white, green, violet, blue, grey, turquoise,black, brown, pink.