Blown Fibre Installation Tools

 

Air Blown Fibre (ABF) Installation Tool

LTT1792040, NTB101116

Description
The air blown fibre installation tool is used for the installation of air blown fibres into micro­-ducts. This unique, easy-to-handle and lightweight tool is designed for optimal performance in combination with all available air blown fibre units and micro-ducts from Hexatronic. The tool uses both compressed air and an electric motor to feed the fibre. An adjustable magnetic coupling limits feeding force on fibre, to avoid damage in the event of a sudden stop. The motor speed and direction is controlled by a trigger switch on the handle. The tool is delivered with a case including nozzles for 3/2 mm, 5/3.5 mm and 7/3.5 mm micro-ducts.

  

Technical Information
Type: Air blown fibre (ABF) installation 
Supported products: Hexatronic ABF 2 - 12 fiber (Ø1.1-1.6 mm), 3 - 7 mm micro-ducts
Capacity: ≤150 m/min

Installation Tool for Nano-Cable

LTT1792020

Description
The Nano-cable installation tool is used for the installation of Nano-cables into micro­-ducts. This tool is calibration-free and designed for optimal performance in combination with all available nano-cables from Hexatronic.

The tool is powered by a separate electrical drill or screwdriver (not included). Most types with an output torque exceeding 0.3 Nm at 250-500 RPM can be used. In addition, compressed air is used for long distance installations.

An adjustable magnetic coupling limits feeding force on the cable, to avoid damage in the event of a sudden stop.

  

Technical Information
Type: Air blown fiber (ABF) installation
Supported products: Hexatronic ABF
2 - 12 fiber (Ø2.0-2.1 mm),
5/3.5 mm to 16/12 mm micro-ducts
Capacity: ≤150 m/min

 

Duct Holder for ABF Installation Tool

HSXA136131

Description
The duct holder is an optional accessory to the for Hexatronic ABF installation tool LTT1792040 and LTT1792011. It enables a secure grip of the duct so that the duct won’t get loose even when high air pressure is used for long distance blowing.
The duct holder also facilitates the installation since the duct can be attached to the blowing tool even when the main body of the tool is in open position. This is especially handy when blowing fibres that are pre-terminated with a connector ferrule.

 Hsxa136131 3

  

Technical Information
Type: Air blown fiber (ABF) installation 
Supported products: for ABF Installation Tool LTT1792040 and LTT 1792011
Capacity:7mm microducts

How can we help you?