The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

MPB30608+SL

Divisible Seals for Microducts

For 5-10 mm Microducts

  • Highly water and gas tight
  • For microducts from 5 to 10 mm
  • For air blown fiber, nano cables or micro cables from 1.0 to 2.5 mm
  • Retro-fit design

The divisible seals for microducts provide a gas and watertight seal for open duct ends installed with air blown fiber or nano cables.

The seals are tested for best functionality in combination with the Hexatronic Stingray air blown fiber and Raptor nano cables.

The seals are designed to be installed after the fiber or cable has been blown in to the microduct. This type of seal is intended for air blown fibers or extra slim nano cables and consist of a clear main body and a rubber seal.

The seal is compressed by pushing the main body towards the duct. These seals are available for 5, 7 and 10 mm microducts.

Plastic housing: Polycarbonate
Rubber seal: TPE

Technical Information

Product Color Black body, color coded rubber seal
IP Rating IP68, 5 m
Installation Notes Ensure that the connector is pushed thoroughly towards the duct to compress the rubber seal around the cable. Failure doing this operation will result in potential leakage.
Ordering Information The articles are ordered in individual pieces, but delivered in packs with defined quantities. See pack size in the article list below.