Tools for micro-duct and fibre handling

 

Micro-duct Assembly Cutter

LDK19501/04

Descritpion
Micro-duct Assembly Cutter, which cuts micro-­duct assemblies up to Ø42 mm.

 

Technical Information
Design: Micro-duct assembly cutter
Type: For all type of ducts
Capacity: Up to Ø42 mm assemblies

Double Sheath Cutter

LDK19501

Description
Cutter to use when dismantling the outer sheath of a double-sheathed HDPE multi­-duct (direct buried).

  

Technical Information
Design: Sheath cutter for micro-duct assemblies
Capacity: >Ø25 mm assemblies

Single Sheath Cutter – Small

LDK1951

Description
A small and handy tool primarily for removing single-sheathed tight protected ducts.The tool is also useful for removing the sheath from most traditional fibre optic cables. The cutting depth can be adjusted from 0 to 2.5 mm.

 

Technical Information
Design: Single sheath cutter for micro-duct assemblies and cables
Capacity: Ø6-28 mm assemblies

Single Sheath Cutter

LDK19501/05

Description
A universal tool primarily for removing single-sheathed tight protected ducts.The tool is also useful for removing the sheath from most traditional fiber optic cables.

 

Technical Information
Design: Single sheath cutter for microduct assemblies and cables
Capacity: <Ø40 mm assemblies

Knife for Sheath Removal of Thick Walled Ducts

LDK19501/01

Description
This knife is especially suitable for safe sheath removal on thick walled duct assemblies. The tip is rounded to avoid the blade cutting the micro­ducts insisde the assembly. It is also safe to use since the risk of accidentally cutting hands is minimised.

 

Technical Information
Design: Knife for sheath removal
Type: For thick walled duct assemblies

Multi Purpose Knife for Cables and Ducts

LDK19501/09

Description
This handy knife is suitable for a variety of operations. 

 

Technical Information
Design: Multi-purpose Knife w. hook

Tool for Tearing up Micro-ducts Longitudinally - The “Snail”

LDK19501/02

Description
Ideal tool for removal of temporary micro-ducts. Temporary micro-ducts are typically used to create a continous blow path through closures or similar.

 

Technical Information
Design: Micro-cable slit cutter
Type: For temporary micro-ducts

Micro-Cable Inner Tube Opener 

LDK19503/1

Description
The sheath cutter is intended for cutting the inner tube of a micro-cable. The cutter is delivered with three straight blades and one round blade. It is possible to adjust the cutting depth to the different thickness of cable sheaths with a small Phillips screwdriver.

 

Technical Information
Type: Micro-cable inner tube opener
Capacity: Up to Ø3 mm tubes

Micro-Cable Sheath Cutter

LDK19503

Description
Used for removal of the sheath on micro-cables. The tool is delivered with three straight blades and one round blade. Adjustable cutting depth.

 

Technical Information
Type: Micro-cable sheath cutter

Micro-duct Cutter – Pliers

LDK19501/03

Description
This micro-duct cutter is used for cutting micro­-ducts prior to the mounting of micro-duct snap-in connectors. The tool can cut ducts with dimensions up to 20 mm.

 

Technical Information
Design: Micro-duct cutter
Type: Blade pliers
Capacity: Ø3-20 mm

ABF Stripping Tool

LDK19501/08

Description
This compact and low-cost tool is used for safe, quick and easy removal of the outer sheath of the air blown fibre (ABF). 

 

Technical Information
Design: ABF stripper
Type: Compact
Capacity: Ø1-1.4 mm (2-12 fibers)

ABF Stripping Scissors

LDK19501/07

Description
Used for removal of the outer sheath on air blown fibre (ABF). The scissors are also a handy tool for various applications. The two grooves on the upper side of the scissors are used for sheath removal.

  

Technical Information
Design: ABF stripper
Type: Scissors
Capacity: Ø1-1.4 mm (2-12 fibers)

Duct Expander

HLDK19505/1

Description
The tool is used to expand the micro-duct ends. The expansion facilitates proper mounting of micro-duct end caps, NDK12103. The expander has a slit to be able to expand the duct even after the installation of an air blown fibre in the duct. For better grip the duct expander can be mounted on any handle that holds hex head bits.

 

Technical Information
Design: Duct expander
Type: Hex head bits
Capacity: For micro-ducts ID Ø3.5 mm

Duct Shaper

LDK19501/10

Description
The tool is used to make the duct end prefectly round before assembly of micro-duct connectors. This will minimise the risk of fibres or cables getting stuck in the connector.

 

Technical Information
Design: Duct shaper
Type: Plastic tool with round head
Capacity: For micro-ducts ID Ø2-10 mm

Duct Sheath Cutter

LDK19502

Description
Used for quick and easy removal of any sheath from tight protected micro-duct assemblies. This is an excellent tool, particurlarly for performing mid-span access.

  

Technical Information
Design: Sheath cutter for micro-duct assemblies
Capacity: Up to Ø50 mm assemblies

Micro-duct Cutter – Small

LDK20803

Description
Provides a clean and straight cut necessary to perform a smooth duct splice prior to the mounting of micro-duct snap-in connectors. The cutter is locked in its closed position for safe handling.

 

Technical Information
Design: Micro-duct Cutter
Type: Compact
Capacity: Ø3-12 mm

How can we help you?