Splitters and Other Passive Optical Devices

Fibre optic splitters or couplers provide division of optical power from one or two input ports into several output ports. Symmetric optical power splitters are used for fibre optic communication systems such as PON FTTx networks.

 

Splitter Modules

RDJ901200+

Description
Splitters to be used for splitter frames in central office applications or in various fibre distribution hubs for outside plant use. The splitters are pre-terminated with protected fanouts and with fitted connectors. 

 

Technical Information 
Design: Splitter modules
Type: PLC splitter in plastic cartridge, G657A
Dimensions: Long tail: 900/1500 mm, short tail: 180/730 mm
Capacity: 1x2 to 2x64 SC, SC/APC, LC, LC/APC

 

Splitter Modules

RDB10416+

Description

The Planar Lightwave Circuit (PLC) splitters provide a uniform division of an optical signal from one or two input fibre ports to multiple output ports.

The splitters are designed to meet the requirements for a wide range of fibre optic communications systems. The wideband performance makes them especially suitable for PON FTTx networks. Low loss under extreme environmental conditions ensures stable operation. Very compact packages with bend resistant fibre allow these modules to be installed into small compartments such as joint closures, Fiber Distribution Hubs (FDH) or fibre termination panels.

 

Technical Information 
Design: Splitter modules
Type: PLC splitter, pigtailed w. ribbon
Capacity: 1x2 to 1x64 

 

Fibre Optic Splitter Shelf

NCD 520 002+, NCD 520 004+

Description
Splitter shelf for 19” rack mounting with pre-installed fibre optic splitters. The shelves are available in different configurations with split ratios of 1x2 to 1x64. The standard connector option is SC/APC.

 

Technical Information
Design: Splitter shelf
Type: 19” mount, 1U, PLC
Dimensions: 410x195x44 mm
Capacity: 1x2 to 2x64 SC/APC

Splitter Frames

NBA 301 04, NBA 301 05

Description
The splitter frames are designed for compact mounting of the RDJ 901 series of splitter modules. The most common use is for central office applications or larger distributed PON sites. There are two frame heights available.

 

Technical Information
Design: Splitter frame
Type: 19” mount, (04) Splitter frame 1U for up to 9 Splitter modules, (05) Splitter frame 4U for up to 35 splitter modules
Capacity: 1U, up to 9 modules, 4U, up to 35 modules

How can we help you?