Fiber Access Terminals and Fiber Termination Boxes

Fiber Access Terminals (FAT) are designed for Ribbonet® Air Blown Fiber and for changeover from fibers emerging from microducts or drop cables to all types of fiber optic distribution cables. The cabinets consist of jointing cabinets and joint closures that are designed for easy access and good protection of fibers. Products for direct splicing of distribution and drop cabling sections as well as closure with connection panels are available.

 

Fiber Splicing Cabinet - FAT, Small

NCD 518 8002

Description
Small sized cabinet intended for fiber splicing and termination of up to 48 microducts (subscribers) or drop cables. The supplied fiber organizers can typically handle up to 96 fibers. 5 mm duct holders are included. 3 mm or 7 mm microducts can be installed by using an optional accessory.

 

Technical Information
Design: Indoor splicing cabinet
Type: Metal, 19”, ETSI or wall mount, IP45
Dimensions: 350x300x120 mm
Capacity: 96 splices, 48 microducts 5/3.5 mm

Fiber Splicing Cabinet - FAT, Medium

NCD 518 8004+

Description
Medium-sized cabinet designed for fiber splicing and termination of up to 96 microducts (5 mm) or drop cables. The organizers typically handle up to 192 fibers. 5 mm duct organizers are included. 3 mm or 7 mm microducts can be installed by using an optional accessory.

 

Technical Information
Design: Indoor splicing cabinet
Type: Metal, 19”, ETSI or wall mount, IP45
Dimensions: 440x300x160 mm
Capacity: 192 splices, 96 microducts 5/3.5 mm

Fiber Splicing Cabinet - FAT, Large

NCD 518 8003

Description
Large cabinet suitable for fiber splicing and ­termination of up to 192 microducts (5 mm) or drop cables. The supplied fiber organizers can typically handle up to 384 fibers. 5 mm duct organizers are included. 3 mm or 7 mm microducts can be installed by using an optional accessory.

 

Technical Information
Design: Indoor splicing cabinet
Type: Metal, 19”, ETSI or wall mount, IP45
Dimensions: 440x600x220 mm
Capacity: 384 splices, 192 microducts 5/3.5

Accessories for Fiber Splicing Cabinets NCD 5188+

SXA 113 95 15 and HSXA 136 103

Fiber Jointing Cabinet – High Capacity

NCD 518 8005, NTM 503 023

Description
This high capacity cabinet is intended for handling cable splices between incoming cables entering the central office and the cables from pre-terminated ODFs. The cabinet can be wall mounted or mounted in a 19” or ETSI rack.

 

Technical Information
Design: Indoor splicing cabinet
Type: Metal, 19”, ETSI or wall mount, cable installation
Dimensions: 440x600x220 mm
Capacity: 768 splices (single fiber) or 2600 splices (8-f ribbon)

Fiber Jointing Cabinet - Small

NCD 518 1098

Description
This extra small cabinet is useful for smaller sites. It is intended for wall mounting. The cabinet includes 2 splice trays. To increase the splice capacity, 6 additional trays can be added (optional accessories).

 

Technical Information
Design: Indoor splicing cabinet
Type: Metal, wall mount, cable installation
Dimensions: 350x300x130 mm
Capacity: 24 to 96* splices (single fiber) or 48 to 192* splices (4-f ribbon)

* With additional splice trays (optional)

Fiber Splicing Cabinet

NCD 518 8006

Description
This is a medium sized cabinet for both traditional 5 mm microducts and 7 mm thick walled ducts. The closure is intended for mounting inside an outer protective cabinet or for indoor use.

 

Technical Information
Design: Splicing cabinet for indoor or outdoor use
Type: Metal, in cabinet or wall mount
Dimensions: 289x493x140 mm
Capacity: 96 (single)/192 (ribbon) splices, 96 microducts, 5/3.5 or 7/3.5 mm

Fiber Access Terminal, Indoor or Outdoor

NCD 507 200+, SXA 113 9518

Description
FATs for indoor or outdoor applications with up to 24 end-user connections. It can handle air-blown fiber in microducts, micro cables as well as drop cables and other fiber optic cables. It can also be used as a fiber optic splice box for various applications. The closure handles both 5 mm and 7 mm microducts. 3 mm microducts can be installed using the optional accessory.

 

Technical Information
Design: Splicing cabinet for indoor or outdoor use
Type: Plastic, wall or pole mount, IP 54 (Indoor), IP56 (Outdoor)
Dimensions: 368x275x114 mm
Capacity: 24 microducts/Splices/Connectors (SC) 

Fiber Termination Box

NEG 203 200

Description
The fiber termination box (FTB) is designed for termination of fibers outside premises in FTTx applications. The box terminates and protects fiber or duct connections for the final drop cabling. It can also be used as a multi-­purpose outdoor fiber optic wall outlet. The box is suitable for both air blown fiber installations and drop cables.

 

Technical Information
Design: Fiber termination box for indoor or outdoor use
Type: Polycarbonate, wall mount, IP 54
Dimensions: 190x130x45 mm
Capacity: 4xSC

Fiber Splicing Cabinet - Street Cabinet

HNBD 116 300+, HNBD 116 301+

Description
Outdoor street cabinet designed for blown fiber or cable splicing. It consists of an outer cabinet and can be equipped with an inner splice closure compartment, complete with splice trays and organizers for 5 mm and 7 mm microducts. The cabinet is made of aluminum. The cabinet can be used with traditional microducts, thick walled ducts or any type of fiber optic cables.

 

Technical Information
Design: Splicing cabinet for outdoor use
Type: Aluminium, above ground, IP54
Dimensions: 480x225x1050 mm (above ground)
Capacity: 96 microducts, 192 splices

Fiber Splicing Cabinet - FAT, for Aerial Installations

NCD 507 200 00, NBL 504 506

Description
This Fiber Access Terminal (FAT) is designed for splicing of air blown fibers and micro cables in aerial installations. The FAT consists of a well ventilated outer protective cabinet and an inner cable management section with splice trays. Cables are held in place with dynamic strain reliefs that allow natural cable movement present in aerial air blown installations. Duct holders secure the mounting of microducts for air blown fiber installations.

 

Technical Information
Design: Splicing cabinet for outdoor use
Type: Sheet steel, pole mounting, IP54
Dimensions: 650x340x170 mm 
Capacity: 64 microducts, 144 splices 

How can we help you?