Thin Walled Microducts - SLIM

 

Thin Walled Microducts, 5/3.5 mm

MPB 302 20+

Description
Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. They are easily connected to 7/3.5 mm thick walled ducts with reduction connectors.

 

The ducts have an outer/inner diameter of 5/3.5mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching. 

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts, 1, 4, 7 and 12-way
Dimensions: OD/ID Ø5/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 4 Microducts, 5/3.5 mm

MPB 302 93+

Description

Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. They are easily connected to 7/3.5 mm thick walled ducts with reduction connectors.

 

The ducts have an outer/inner diameter of 5/3.5mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching. 

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts, 1, 4, 7 and 12-way
Dimensions: OD/ID Ø5/3.5 mm
Lengths: 500 or 1000 m

 

 

Assemblies with 7 Microducts, 5/3.5 mm

MPB 302 93+

Description

Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. They are easily connected to 7/3.5 mm thick walled ducts with reduction connectors.

 

The ducts have an outer/inner diameter of 5/3.5mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching. 

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts, 1, 4, 7 and 12-way
Dimensions: OD/ID Ø5/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 12 Microducts, 5/3.5 mm

MPB 302 93+

Description
Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. They are easily connected to 7/3.5 mm thick walled ducts with reduction connectors.

 

The ducts have an outer/inner diameter of 5/3.5mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching. 

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts, 1, 4, 7 and 12-way
Dimensions: OD/ID Ø5/3.5 mm
Lengths: 500 or 1000 m

 

 

Thin Walled Microducts, 10/8 mm

MPB 302 60+

Description
Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. 

 

The ducts have an outer/inner diameter of 10/8mm and are suitable for installation of micro cables and nano cables. The ducts are made of HDPE with and have a low friction inner surface for best blowing performance.  

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts
Dimensions: OD/ID Ø10/8 mm
Lengths: 2100 m

 

Thin Walled Microducts, 12/10 mm

MPB 302 62+

Description
Thin walled microducts are normally installed in existing pipes with limited space and where thick walled ducts will not fit. 

 

The ducts have an outer/inner diameter of 12/10 mm and are suitable for installation of micro cables and nano cables. The ducts are made of HDPE with and have a low friction inner surface for best blowing performance.

 

Technical Information
Design: Thin walled ducts
Type: Installation in existing pipes
Capacity: single ducts
Dimensions: OD/ID Ø12/10 mm
Lengths: 2100 m

 

How can we help you?