The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

Direct Buried Thick Walled Ducts

Thick Walled Ducts (TWD) are characterized by heavy wall microducts and a relatively thin outer sheath. The microducts themselves are rugged enough to protect the fiber cables inside.

Typical dimensions for TWD are from 5 mm up to 25 mm with inner diameters from 2.5 mm to 20 mm.

Ducts with inner diameter of 6 mm or larger have longitudinal grooves on the inside to minimize friction, reduce turbulent air flow and increase blowing distance.

To provide a hassle-free installation experience, all ducts are made of low memory materials that minimizes the "curly duct" -effect when rolling out ducts from a drum. During manufacturing, continuous monitoring of dimensions and tolerances are done by e.g. x-ray. 100% of all ducts are tested with an inner clearance test (bullet).

Optionally, Hexatronic microduct assemblies can be supplied with a tracer wire. This enables the duct to be found with a cable locator.

Thick Walled Ducts (TWD) are characterized by heavy wall microducts and a relatively thin outer sheath. The microducts themselves are rugged enough to protect the fiber cables inside.

Typical dimensions for TWD are from 5 mm up to 25 mm with inner diameters from 2.5 mm to 20 mm.

Ducts with inner diameter of 6 mm or larger have longitudinal grooves on the inside to minimize friction, reduce turbulent air flow and increase blowing distance.

To provide a hassle-free installation experience, all ducts are made of low memory materials that minimizes the "curly duct" -effect when rolling out ducts from a drum. During manufacturing, continuous monitoring of dimensions and tolerances are done by e.g. x-ray. 100% of all ducts are tested with an inner clearance test (bullet).

Optionally, Hexatronic microduct assemblies can be supplied with a tracer wire. This enables the duct to be found with a cable locator.