Thick Walled Microducts

 

Thick Walled Microducts, 7/3.5 mm

MPB30284+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Thick Walled Sheated Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.


 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 2 Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 4 Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 7 Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 12 Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Assemblies with 19 and 24 Microducts, 7/3.5 mm

MPB30278+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 7/3.5 mm and are suitable for installation of air blown fiber and nano cables. The ducts are made of HDPE with anti static agents and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 1, 2, 4, 7 and 12-way
Dimensions: OD/ID Ø7/3.5 mm
Lengths: 500 or 1000 m

 

Thick Walled Microducts, 14/10 mm

MPB30285+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 14/10mm and are suitable for installation of micro cables and nano cables. The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2, 4 and 7-way
Dimensions: OD/ID Ø14/10 mm
Lengths: 500, 680 or 1000 m

Assemblies with 2 Microducts, 14/10 mm

MPB30281+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 14/10mm and are suitable for installation of micro cables and nano cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2, 4 and 7-way
Dimensions: OD/ID Ø14/10 mm
Lengths: 500, 680 or 1000 m

Assemblies with 4 Microducts, 14/10 mm

MPB30277+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 14/10mm and are suitable for installation of micro cables and nano cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2, 4 and 7-way
Dimensions: OD/ID Ø14/10 mm
Lengths: 500, 680 or 1000 m

Assemblies with 7 Microducts, 14/10 mm

MPB30277+

Description
Thick walled microducts and microduct assemblies to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 14/10mm and are suitable for installation of micro cables and nano cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2, 4 and 7-way
Dimensions: OD/ID Ø14/10 mm
Lengths: 500, 680 or 1000 m

Thick Walled Microducts 16/10 mm

MPB30241+

Description
Thick walled microducts. The ducts have an outer/inner diameter of 16/10 mm and are suitable for installation of micro cables. The ducts are made of HDPE and have a low friction inner surface for best blowing performance.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: Single ducts
Dimensions: OD/ID Ø16/10 mm
Lengths: 1000 m

Thick Walled Microducts 16/12 mm

MPB30218+

Description
Thick walled microducts to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 16/12 mm and are suitable for installation of micro cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2 and 4-way
Dimensions: OD/ID Ø16/12 mm
Lengths: 1000 m

Assemblies with 2 Microducts, 16/12 mm

MPB30218+

Description
Thick walled microducts to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 16/12 mm and are suitable for installation of micro cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2 and 4-way
Dimensions: OD/ID Ø16/12 mm
Lengths: 1000 m

Assemblies with 4 Microducts, 16/12 mm

MPB30218+

Description
Thick walled microducts to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 16/12 mm and are suitable for installation of micro cables.  The ducts are made of HDPE and have a low friction inner surface for best blowing performance. Assemblies have a thin outer sheath of HDPE that is easily removed when splicing or branching.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts, 2 and 4-way
Dimensions: OD/ID Ø16/12 mm
Lengths: 1000 m

Thick Walled Microducts 18/12 mm

MPB30217+

Description
Thick walled microducts to be used in combination with thick walled microduct assemblies. The ducts have an outer/inner diameter of 18/12 mm and are suitable for installation of micro cables. The ducts are made of HDPE and have a low friction inner surface for best blowing performance.

 

 

Technical Information
Design: Thick walled ducts
Type: Direct buried or installation in existing pipes
Capacity: single ducts
Dimensions: OD/ID Ø18/12 mm
Lengths: 1900 m

How can we help you?