Microduct Connectors and End Plugs

 

Microduct Connectors – Standard Series, Straight

MPB30601

Description

Microduct snap-in connectors and end stops for quick and easy splicing or termination of micro­ducts. The body is transparent for easy fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Above ground use or in closurses
Dimensions: OD/ID Ø3/2 to 14/10 mm

Microduct Connectors – Standard Series, Reduction Connectors

MPB30603

Description

Microduct snap-in connectors and end stops for quick and easy splicing or termination of micro­ducts. The body is transparent for easy fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Above ground use or in closurses
Dimensions: OD/ID Ø3/2 to 14/10 mm

Microduct End Stop - Standard Series

MPB30606

Description

Microduct snap-in connectors and end stops for quick and easy splicing or termination of micro­ducts. The body is transparent for easy fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Above ground use or in closurses
Dimensions: OD/ID Ø3/2 to 14/10 mm

Microduct Connectors – Standard Series, Straight w. Cover

1/MPB30601

Description

Microduct snap-in connectors and end stops for quick and easy splicing or termination of micro­ducts. These connectors have a transparent body for easy fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct. 

 

Technical Information
Design: Microduct Connector and End Stops, re-openable, with case
Type: Direct Buried Installation 
Dimensions: OD/ID Ø7/3.5 to 18/12 mm

Microduct End Stop – Standard Series, w. Cover

1/MPB30606

Description

Microduct snap-in connectors and end stops for quick and easy splicing or termination of micro­ducts. These connectors have a transparent body for easy fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable, with case
Type: Direct Buried Installation 
Dimensions: OD/ID Ø7/3.5 to 18/12 mm

Microduct Connectors - High Grade, Straight

HMPB30601

Description
The ”Crystal Clear” range of connectors are high grade connectors that offer reliable performance in all environments. The connectors are 100% metal-free and can be used directly into ground with salt water. The connectors are also highly resistant to chemicals, oil, gasoline etc. A crystal clear body facilitates fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct. The connectors can be installed directly into ground or above ground without additional protection.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Direct buried, Above ground use or in closurses, metal-free, chemical resistant
Dimensions: OD/ID Ø3/2 to 18/12 mm

Microduct Connectors – High Grade, Reduction Connectors

HMPB30603

Description

The ”Crystal Clear” range of connectors are high grade connectors that offer reliable performance in all environments. The connectors are 100% metal-free and can be used directly into ground with salt water. The connectors are also highly resistant to chemicals, oil, gasoline etc. A crystal clear body facilitates fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct. The connectors can be installed directly into ground or above ground without additional protection.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Direct buried, Above ground use or in closurses, metal-free, chemical resistant
Dimensions: OD/ID Ø3/2 to 18/12 mm

Microduct End Stop – High Grade

HMPB30606

Description

The ”Crystal Clear” range of connectors are high grade connectors that offer reliable performance in all environments. The connectors are 100% metal-free and can be used directly into ground with salt water. The connectors are also highly resistant to chemicals, oil, gasoline etc. A crystal clear body facilitates fault location during installation. The connectors are available as straight connectors for spicing of microducts with the same dimensions, or as reducers for splicing of ducts with different dimensions, as well as end stops for terminating duct ends to avoid water and dirt from entering the duct. The connectors can be installed directly into ground or above ground without additional protection.

 

Technical Information
Design: Microduct Connector and End Stops, re-openable
Type: Direct buried, Above ground use or in closurses, metal-free, chemical resistant
Dimensions: OD/ID Ø3/2 to 18/12 mm

Microduct Connectors – Gas Block, Straight

MPB 306 02 and MPB 306 07+

Description

The gas block microduct snap-in connector is normally used between indoor and outdoor environments to prevent air flow that may result in condensed water getting into ducts. After cable installation, the connector can be gas sealed by turning a ring on the body or by pushing the connector ends together.

 

Technical Information
Design: Microduct Gasblock Connector and End Stops, re-openable
Type: Above ground use
Dimensions: OD/ID Ø5/3.5 to 14/10 mm

Microduct Connectors – Gas Block, Reduction Connector

MPB30607/75

Description

The gas block microduct snap-in connector is normally used between indoor and outdoor environments to prevent air flow that may result in condensed water getting into ducts. After cable installation, the connector can be gas sealed by turning a ring on the body or by pushing the connector ends together.

 

Technical Information
Design: Microduct Gasblock Connector and End Stops, re-openable
Type: Above ground use
Dimensions: OD/ID Ø5/3.5 to 14/10 mm

End Caps for Microducts

MPB 306 09+ and SRS 106 17

Description

The end caps are used for temporarily seal open duct ends to avoid water and dirt from entering the microducts. 

 

Technical Information
Design: End caps for microducts
Type: Above ground use
Dimensions: OD Ø3 to 18 mm

End Sleeves for Microduct Assemblies

SRS101617+

Description

Rubber end sleeves used for temporary sealing of unused microduct assemblies to prevent water and dust from getting into the ducts. The end sleeves are available in several versions for different types of microduct assemblies. 

 

Technical Information
Design: End sleeves for microduct assemblies
Type: Temporary use
Dimensions: OD Ø3 to 18 mm

How can we help you?